Welcome to Advanced Clutch Technology! "Excellence in Performance", backed by the best one-year warranty in the industry!Website Notices

CW02 - Flywheel Counterweight

Loading...

Select Your Vehicle

was $369.00 Special Price $313.65
Availability: In stock
SKU
CW02

Specifications

Specifications
Item Description Flywheel Counterweight
Product Weight (lbs.) 4.0
Warranty 12 Months (view details)

Description

CW02 counterweights are required when installing an XACT flywheel for various applications.

Description
Feel Assuring smooth operation
Life Reduces load on bearings to extend engine life
Quality Precisely machined for minimal balancing adjustment
Recommended Use Recommended for use with ACT flywheel
ACT Difference Manufactured to tight tolerances, balanced to perfection

Vehicle Fitment

Fitment Info
Application Engine
1989 Mazda RX-7 Turbo 1.3 R2 GAS FI 1308cc | Turbocharged
1990 Mazda RX-7 Turbo 1.3 R2 GAS FI 1308cc | Turbocharged
1991 Mazda RX-7 Turbo 1.3 R2 GAS FI 1308cc | Turbocharged
1993 Mazda RX-7 Base 1.3 R2 GAS FI 1308cc | N/R | Turbocharged
1993 Mazda RX-7 R1 1.3 R2 GAS FI 1308cc | N/R | Turbocharged
1993 Mazda RX-7 Touring 1.3 R2 GAS FI 1308cc | N/R | Turbocharged
1994 Mazda RX-7 Base 1.3 R2 GAS FI 1308cc | N/R | Turbocharged
1994 Mazda RX-7 R2 1.3 R2 GAS FI 1308cc | N/R | Turbocharged
1994 Mazda RX-7 Touring 1.3 R2 GAS FI 1308cc | N/R | Turbocharged
1995 Mazda RX-7 Base 1.3 R2 GAS FI 1308cc | N/R | Turbocharged
1995 Mazda RX-7 R2 1.3 R2 GAS FI 1308cc | N/R | Turbocharged
1995 Mazda RX-7 Touring 1.3 R2 GAS FI 1308cc | N/R | Turbocharged

Frequently Asked Questions

Can I use an aftermarket flywheel with an ACT clutch?
The ACT clutch system is designed to work with both stock and good quality aftermarket flywheels. Inferior aftermarket flywheels may have trouble with warpage or high wear. When replacing a flywheel, be sure that the new flywheel meets the same specifications, such as proper step, ring gear tooth count, flywheel thickness, ring gear offset, etc. If the ACT clutch is designated as part of a conversion kit, then it must be used with only the corresponding ACT flywheel.
What is a flywheel step?
The flywheel step determines the proper working range of the pressure plate and is extremely crucial for the clutch to work properly. The step is the distance between the friction surface and the pressure plate mounting point on the flywheel. Depending on the make and model of the car it can either be an UP step or DOWN step and sometimes the flywheel will be flat (zero step). Check the manufacturer's specifications about the proper flywheel step for the application.
Can the XACT Flywheels be resurfaced, and is there a special process?
Yes, ACT XACT flywheels can be resurfaced just like a stock flywheel and there is no special process other than using a flywheel grinder in good condition to remove as little material as possible for full cleanup (no more than 0.040” / 1.02mm may be removed). Make 100% sure that the proper flywheel step is maintained as this will affect the clutch function if incorrect.

PROP 65 WARNING

This product can expose you to chemicals including carbon black, glass wool fibers, and silica (in clutch discs), chromium and nickel, which are known to the State of California to cause cancer or birth defects or other reproductive harm. for more information, visit www.P65Warnings.ca.gov