We're Open! Check Our Latest Updates Regarding Covid-19 and Other Store Notices Here

6220112 - 6 Pad Sprung Race Disc


Select Your Vehicle

was $220.00 Special Price $187.00
Availability: Out of stock


Item Description 6 Pad Sprung Race Disc
Product Weight (lbs.) 3.1
Disc Material Ceramic
Diameter (Inches) 8.7
Diameter (Millimeters) 220
Warranty 12 Months (view details)
SFI 1.1


6220112 is a 6-pad spring-centered race discs made with high quality ceramic friction materials. The engagement is harsher, but shifting is faster. The heavy duty torsional dampening springs are stronger, in most cases, than standard springs and are provided in the best sizes and spring rates to suit the application. The 6-pad, spring-centered disc is recommended for larger clutch sizes to absorb more heat and for smoother engagement.

Feel Aggressive engagement, quick shifts, mild to moderate gear rattle
Life Premium ceramic friction materials provide moderate wear rates and high heat tolerance
Quality Utilizes wraparound spring windows, thicker retainer stampings and a heat-treated, spring steel drive plate to provide support, reduce stress concentrations and increase strength and reliability
Recommended Use Recommended for high horsepower street or race use
ACT Difference High burst strength and holds 28% more torque than typical organic materials

Vehicle Fitment

Fitment Info
Application Engine
1990 Acura Integra GS 1.8 L4 GAS FI 1834cc
1990 Acura Integra LS 1.8 L4 GAS FI 1834cc
1990 Acura Integra RS 1.8 L4 GAS FI 1834cc
1991 Acura Integra GS 1.8 L4 GAS FI 1834cc
1991 Acura Integra LS 1.8 L4 GAS FI 1834cc
1991 Acura Integra RS 1.8 L4 GAS FI 1834cc

Frequently Asked Questions

Can an ACT Race puck-style disc be used for daily driving, and is it recommended?
ACT's race discs are very aggressive and provide no-nonsense performance response. As a result, the engagement is harsh. Taking off from a stop can cause judder and/or an uncomfortable noise. These characteristics have no effect on the performance on the clutch or the drive line components. This type of disc should only be used in a professional race setting and never on the street. ACT always recommends using an organic disc on the street because it offers a smoother engagement and a longer lasting performance value for everyday drivers.
When should a clutch disc be replaced?
The majority of new discs measure .312-.315” (7.93 – 8.00mm) thick – fully worn is .275” (7.00mm) or below. A few applications (mostly Audi and BMW) start out at .332 - .335” (8.43 – 8.50mm). These are to be replaced when below .295” (7.50mm). It’s best to measure with a micrometer. Puck discs are measured as-is, where organic street discs are correctly measured by fully compressing the engagement cushion (marcel) between the linings. If the lining rivets on either side of the disc have made contact with the flywheel or pressure plate face, the disc must be replaced. Note: Using a disc that is thicker or thinner than the working range the pressure plate is designed for will have varying, and often very poor, results.

United States

Options Auto Salon

985 N Todd Avenue
Azusa, CA 91702

Show a map

Not in Stock

Summit Racing Equipment

PO Box 909
Tallmadge, OH 44278

Show a map

Not in Stock



Archimedesstraat 7 3846 CT Harderwijk The Netherlands

Show a map

In Stock